Mailleorder

Our own monthly subscription service is now live! We know we have been teasing with this since last year, and now you can finally see what it is! We have several options for you to choose from.

Giftmaille – one time order

Maillebag – recurring subscription

3 month Maillebag gift subscription

6 month Maillebag gift subscription

Maillebox – recurring subscription

3 month Maillebox gift subscription

6 month Maillebox gift subscription

For more in depth information about Mailleorder, please visit the Mailleorder page (you can find a link to this page at the bottom of every page on our website, in the big blue box on the left hand side, or in the drop down menu at the top of every page on the right hand side).

Vortex

tsthing3We have a new design called vortex.  It can be done in several sizes, and  3 or 4 points.  “Fanned” rings can all be going the same way, or facing each other.  We see lots of possibilities with this one.  And since it’s been quite some time since we have done a free design, we have decided to do this as one.

We do have kits available on our site, here

Instructions will be for a small size 3 point version, and done in BA (with red brass rings to show the current step).  (More size options and 4 point lists will be at the end of the post.)

Supply list:

Base Metal – Small

Ring #1:  20 1/8” AWG – 24 rings

Ring #2:  20 11/64” AWG – 6 rings

Ring #3:  19 9/32” SWG – 1 ring

 

Precious Metal – Small

Ring #1:  20 1/8” AWG – 24 rings

Ring #2:  20 11/64” AWG – 6 rings

Ring #3:  18 9/32” AWG – 1 ring

step1

 

 

Using six closed Ring #1s, and two Ring #2s, make a 2-1-2 chain.

 

 

 

step2

 

 

Use a third Ring #2 to close the loop by going through the loose Ring #1s.

 

 

 

step3

 

Using a closed ring #3, lay it on the Ring #2s as shown in picture.

 

 

 

step4

Using an open Ring #2, go through two adjacent sets of Ring #1s.  Ensure Ring #3 is between the two Ring #2s capturing the ring #3 in the process.  Place a Ring #1 through both Ring #2s to lock Ring #3 in place.

 

 

 

step5

 

Repeat step 3 two more times.

 

 

 

 

 

step6

 

Add five Ring #1s to each point (totaling six per point), making sure they lay in the same direction.

 

 

 

step7

Once all of the rings are on the points, GENTLY pull them into place.  They will click into place, you can both hear and feel it.  Once locked, they should not move from a locked position

 

 

 

This can be done in 3 or 4 points, with fan rings pointing in either direction.

 

4_butterfly tsthing2

 

 

 

 

 

Other ring sizes tested in BA for 3 point

Base Metal – Medium

Ring #1:  18 11/64” SWG – 24 rings

Ring #2:  18 17/64” SWG – 6 rings

Ring #3:  16 7/32” SWG – 1 ring

 

Base Metal – Large

Ring #1:  16 15/64” SWG – 24 rings

Ring #2:  16 11/32” SWG – 6 rings

Ring #3:  14 ½” SWG – 1 ring

 

4 point ring sizes
Base Metal – Small  

Ring #1:  20 9/64” AWG – 32 rings

Ring #2:  20 11/64” AWG – 8 rings

Ring #3:  18 3/8” SWG – 1 ring

 

 

Precious Metal – Small 

Ring #1:  20 9/64” AWG – 32 rings

Ring #2:  20 3/16” AWG – 8 rings

Ring #3:  16 3/8”  AWG – 1 ring

 

Base Metal – Medium

Ring #1:  18 3/16” SWG – 32 rings

Ring #2:  18 17/64” SWG – 8 rings

Ring #3:  16 ½”  SWG – 1 ring

 

Base Metal – Large

Ring #1:  16 7/32” SWG – 32 rings

Ring #2:  16 11/32” SWG – 8 rings

Ring #3:  14 5/8” SWG – 1 ring

 

This tutorial is copyrighted material and all rights and design ownership remain with the authors. You may produce and sell pieces made using this design tutorial. This tutorial may not be loaned, taught or reproduced, in part or in full, in any manner (electronic, photocopying, print, video/audio recording or otherwise) without prior written authorization of the author. This tutorial entitles  you to produce physical items for personal use, as gifts or for sale in small quantities under the name Vortex and credit must be given to the designers. The tutorial remains the intellectual property of C & T Designs, all rights reserved. Mass production of the finished product is prohibited.

Upgrades

We have hinted that we have a lot in store for you in the coming year.  There are a number of cool things on the horizon, spread throughout the year.  It’s time to let you in on one of the things that is going to happen quick.

We are changing our website.  Don’t worry too much, the core of it will be the same.  What we are doing though, is changing some navigation to make it easier to find the things that seem to be asked about the most.  For example, scales will get it’s own category.  We are also going to tweak the site search engine to also make it easier to find the things you are searching for.   We will be adding a feature or two that we are not ready to give away just yet, and we will improving some of the functionality for you.  Most of these changes will be slight and you will start to see them over the next week or two.  Sometime in January, we will do a big update, and that will require the site to be down for a short bit.  Not to worry, we will give you warning so we don’t scare you too much.

Sometime after that big update, we will start in with the big surprises.  😀

Holiday Shutdown

It’s that time of year again where we have to count all the little rings and findings.  We’ve been training the dogs to help, but that hasn’t gone very well.
If you have been with us for a while, you know we close down for a bit to count, and so everybody here can spend some time with family and get some rest before we hit the grindstone again. (And boy do we have a lot of plans for you next year)  If you are new to us, well, now you know.
This year we will close December 23rd at 3pm, and re-open January 3rd.

Also don’t forget inventory also means end of the year sale items.  Make sure you keep an eye out for them in January.

We hope you have a wonderful holiday season, however you celebrate.

Don’t forget, It’s In The Maille!!!

Anodized aluminum

We get questions almost daily about AA.  Some are easy to answer, some are not.  Some we are not ready to answer.  This post will take care of some of all of those.
First, we want to remind you we have a page set up specifically to show what AA is out at the anodizer and being worked on.  You can find it here:

AA stock page

Now, what’s not on that list.  12g AA.  Have no fear, all the colors we don’t currently have in stock are out at the anodizer in addition to what is on that list.  All of the 12g rings, and most of what is on that list, we hope to have back in just over a week.  There are a couple that will take a week or so longer.

****BIG SURPRISE REVEAL TIME*****
Also not on that list, but at the anodizer (and in the little longer category) is 20g 1/8″ Black.  That’s right, we have started making 20g AA.  This is a long term project.  The rings are so little, they take so long to make, so we have paced this project for the YEAR.  The listing for them is already up on our site, but only available colors are up. (Currently just red)  As we get colors back, we will add them.  We chose to do it this way so our “Notify when back in stock” feature doesn’t get flooded.

***SECOND BIG SURPRISE REVEAL TIME****
Can you handle a second surprise?
If not, stop reading now, if you think you can, read on.
We are also starting to make 16g 3/16″ AA.  They should start showing up in a little over a month.  These are a little faster to make, so we are likely to put up a block of colors at a time.

As always, we are happy to look at making other sizes, but we need to hear from you to do so.  So, if there is another size you would like to see us do, let us know.

And remember, It’s in the Maille!!

 

 

Holiday closing

As a reminder we will be closed December 24th through Jan 3rd, re-opening on January 4th.  We use this time to do our year end inventory, and allow our employees to spend some time with family.  While our physical store will be closed, you can still order online.  There will be VERY LIMITED shipping during this time.

We had a wonderful year again, and hope you did as well.  We have many new things in the works for you for next year, so be sure to keep an eye out.

November

If you have been around us any length of time, you know that we have a sale in November. (And if you didn’t, consider this your notice)  You also may or may not know we have been known to pull some shenanigans around said sale.  We are happy to say this year won’t be any different.
What can you expect?  Oh boy, we have a lot planned for you.  While we don’t want to give away all the fun just yet, we will tell you that a certain all niobium Maillstrom pendant is VERY likely to make a return, and there is a pretty good chance there will be a matching earring kit.

Ring stats

We still get a lot of people asking how many rings are in an ounce, what is this size in metric, and a list of other questions.  While we don’t mind answering these questions, we have tried to make it as easy for you as we can.  On any given ring listing, if you look at the the description (you may have to scroll depending on your monitor resolution) you will find most, if not all, the information you are looking for.

This information may be displayed a little differently on some listings, like Silver,  but the same basic information should still be there.

Holiday Closing

It’s that time of the year again.  Time to count all those little rings and findings, and  beads and……..

Our physical store will be  closed Dec 24th through Jan 4th.  You may still order online, but there will be VERY LIMITED shipping during this time as well.

Not only do we do inventory, but this is a time for all our staff to spend a little time with their families before before coming back here and getting you all the awesome you order.

 

From the entire staff here, we thank you for allowing us to do what we love, and we hope you have a wonderful holiday, no matter how you celebrate it.