Vortex

tsthing3We have a new design called vortex.  It can be done in several sizes, and  3 or 4 points.  “Fanned” rings can all be going the same way, or facing each other.  We see lots of possibilities with this one.  And since it’s been quite some time since we have done a free design, we have decided to do this as one.

We do have kits available on our site, here

Instructions will be for a small size 3 point version, and done in BA (with red brass rings to show the current step).  (More size options and 4 point lists will be at the end of the post.)

Supply list:

Base Metal – Small

Ring #1:  20 1/8” AWG – 24 rings

Ring #2:  20 11/64” AWG – 6 rings

Ring #3:  19 9/32” SWG – 1 ring

 

Precious Metal – Small

Ring #1:  20 1/8” AWG – 24 rings

Ring #2:  20 11/64” AWG – 6 rings

Ring #3:  18 9/32” AWG – 1 ring

step1

 

 

Using six closed Ring #1s, and two Ring #2s, make a 2-1-2 chain.

 

 

 

step2

 

 

Use a third Ring #2 to close the loop by going through the loose Ring #1s.

 

 

 

step3

 

Using a closed ring #3, lay it on the Ring #2s as shown in picture.

 

 

 

step4

Using an open Ring #2, go through two adjacent sets of Ring #1s.  Ensure Ring #3 is between the two Ring #2s capturing the ring #3 in the process.  Place a Ring #1 through both Ring #2s to lock Ring #3 in place.

 

 

 

step5

 

Repeat step 3 two more times.

 

 

 

 

 

step6

 

Add five Ring #1s to each point (totaling six per point), making sure they lay in the same direction.

 

 

 

step7

Once all of the rings are on the points, GENTLY pull them into place.  They will click into place, you can both hear and feel it.  Once locked, they should not move from a locked position

 

 

 

This can be done in 3 or 4 points, with fan rings pointing in either direction.

 

4_butterfly tsthing2

 

 

 

 

 

Other ring sizes tested in BA for 3 point

Base Metal – Medium

Ring #1:  18 11/64” SWG – 24 rings

Ring #2:  18 17/64” SWG – 6 rings

Ring #3:  16 7/32” SWG – 1 ring

 

Base Metal – Large

Ring #1:  16 15/64” SWG – 24 rings

Ring #2:  16 11/32” SWG – 6 rings

Ring #3:  14 ½” SWG – 1 ring

 

4 point ring sizes
Base Metal – Small  

Ring #1:  20 9/64” AWG – 32 rings

Ring #2:  20 11/64” AWG – 8 rings

Ring #3:  18 3/8” SWG – 1 ring

 

 

Precious Metal – Small 

Ring #1:  20 9/64” AWG – 32 rings

Ring #2:  20 3/16” AWG – 8 rings

Ring #3:  16 3/8”  AWG – 1 ring

 

Base Metal – Medium

Ring #1:  18 3/16” SWG – 32 rings

Ring #2:  18 17/64” SWG – 8 rings

Ring #3:  16 ½”  SWG – 1 ring

 

Base Metal – Large

Ring #1:  16 7/32” SWG – 32 rings

Ring #2:  16 11/32” SWG – 8 rings

Ring #3:  14 5/8” SWG – 1 ring

 

This tutorial is copyrighted material and all rights and design ownership remain with the authors. You may produce and sell pieces made using this design tutorial. This tutorial may not be loaned, taught or reproduced, in part or in full, in any manner (electronic, photocopying, print, video/audio recording or otherwise) without prior written authorization of the author. This tutorial entitles  you to produce physical items for personal use, as gifts or for sale in small quantities under the name Vortex and credit must be given to the designers. The tutorial remains the intellectual property of C & T Designs, all rights reserved. Mass production of the finished product is prohibited.